G3 Blue Shower Maintenance Cleaner

Nonflammable & powerful degreaser

Part # Name Size Units
Per Case
Price
Per Case
Case
Qty
 
1630-16S G3 Blue Shower - 16oz aerosol 16 oz (454g) 12 $493.56
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Order from an authorized distributor

G3 Blue Shower is non-flammable cleaner formulated to be powerful, yet economical. Eliminate brushing and scrubbing, saving time and materials. Clean oil and contaminants off of metal parts, printed circuit boards, barcode instruments, switch boxes, gear relays, and electronic motor controllers.

Techspray has produced Blue Shower® maintenance cleaners for over 30 years, making Blue Shower a staple in maintenance departments all over the world!

New improved formula with lower global warming. (click link for more info)

Features & Benefits

  • Powerful cleaner
  • Non-flammable
  • Rapid evaporation
  • Zero residue
  • Dielectric strength 27.3 kv
  • Non-ozone depleting
  • NSF registered K1 and K2

For more information, check out our The Expert’s Guide to Degreasers & Maintenance Cleaners.

Specifications: Boeing D6 17487, Rev P

Call-outs: Ford TOX #16781


FAQ's

How do you know the safe exposure limit of a degreaser, contact cleaner, or flux remover?
The personal hazard associated with a solvent is often defined using Threshold Limit Value (TLV), which is the recommended average exposure in an 8-hour day, 40 hour work week. The lower the TLV of a particular substance, the less a worker can be exposed to without harmful effects. TLV is stated on the SDS of chemical products, in additional to recommended personal protection equipment (or PPE). The threshold limit value of a solvent is generally set by the American Conference of Governmental Industrial Hygienists (ACGIH). The unit of measure is Parts Per Million (PPM).
How do you use an aerosol cleaner?

Hold object to be cleaned in vertical position. Pull trigger gently to control solvent flow rate. Spray from top to bottom, allowing the liquid to flush away contaminants. 

There are a number of regulations prohibiting the use of chlorinated solvents. Should I be concerned with Trans, which is used in many of your nonflammable cleaners?

No, it should not be a concern. Many of Techspray's nonflammable solvents (e.g. G3, Precision-V, PWR-4) contain 1,2-trans-dichloroethylene (Trans, CAS# 156-60-5), which has caused confusion. The regulations controlling chlorinated solvents do not generally pertain to Trans. The following are the reasons: Many are confused with “chloro” substances due to the NESHAP requirements. The big 3 chlorinated substances are Perchloroethylene (Perc), Trichloroethylene (TCE), and methylene chloride. The association of those with all chlorinated substances is not valid. NESHAP requirements only refer to restrictions of emissions of hazardous air pollutants (HAP). Of the nearly 200 substances listed as HAP’s, Trans is not on that list. Reference the following link: https://www.epa.gov/haps/initial-list-hazardous-air-pollutants-modifications. Trans has the same exposure limit (per ACGIH) time-weighted average (TWA) as 2-propanol (IPA) -- 200 ppm. In contrast, n-Propyl Bromide (nPB) is commonly used in vapor degreasers, with TWA established by ACGIH of 10 ppm. It has been proposed to be reduced to 0.1 ppm. nPB is also listed on various carcinogen lists, notably Prop 65.

Articles

Top 7 Criteria for Qualifying a New Aviation MRO Degreaser
Given the wide range of cleaning tasks an MRO faces, each cleaning product will offer characteristics more or less suited to a specific task. However, there are seven important characteristics to rank against the intended application and the business location's regulatory requirements. An easy-to-us...
Read This Post

How to Mitigate the Risk of Aircraft Damage from Chemical Agents
FAA regulations require aircraft maintenance personnel to use only approved chemicals. When a failure to meet this legislative requirement can have serious consequences to aircraft and personnel safety, how can a maintenance technician be sure they comply? Technical data sheets and compliance with a...
Read This Post

Proper Cleaning Keeps Drone Aircraft (UAS / UAV) Flying High
Drones are especially sensitive due to their complete reliance on electronics and sensors, as well as being subject to the same filth and grime as their manned counterparts. Let’s take a look at what is being done to keep these aircraft clean in the area of operational responsibility (AOR), and at t...
Read This Post

Replacing n-Propyl Bromide (nPB): What You DON'T Know CAN Hurt You
Welcome to our webinar, our Techspray webinar is replacing n-propyl bromide (nPB), which you don't know can hurt you. We're going to be going over issues with n-propyl bromide, and how to identify and qualify replacement as efficiently as possible. You guys aren't chemical experts, at least I assume...
Read This Post

EPA Considers 1-Bromopropane (n-Propyl Bromide, nPB) an “Unacceptable Risk” for Degreasing
In the report “Nontechnical Summary of the Risk Evaluation for 1-Bromopropane (n-Propyl Bromide)”, the US Environmental Protection Agency (EPA) has determined that this solvent “presents an unreasonable risk for 16 conditions of use.” Those conditions of use include: Industrial and consumer use for ...
Read This Post

Isopropyl Alcohol (IPA) Replacements for Electronic Assembly and Repair
Isopropyl alcohol, also referred to as IPA, isopropanol, and 2-propanol, may be in short supply for the coming weeks or months because of the COVID-19 (Novel Coronavirus) pandemic. This will be particularly challenging for companies using IPA for flux removal, stencil cleaning, and industrial degrea...
Read This Post

The Expert’s Guide to Degreasers & Maintenance Cleaners
A degreaser is a cleaner designed to remove grease, oils, cutting fluids, corrosion inhibitors, handling soils, finger prints, and other contamination common in assembly, stamping, other types of metal fabrication, refineries, motor repair, airplane hangars, and many other applications.
Read This Post

Trans: the Cleaning Workhorse
Trans-1, 2 - Dichloroethylene, commonly called “trans”, is an important solvent cleaning workhorse because it has high solvency, is reasonably priced, and can easily be formulated into nonflammable blends when combined with hydrofluorocarbon (HFC), hydrofluoroether (HFE) or Hydrofluoroolefin (HFO) s...
Read This Post
You did not finish submitting your information to request a sample